6200 Reusable Half Face Respirator with Goggles

Reliable respiratory and eye protection for painting, spraying and workshop tasks

- The 6200 Reusable Half Face Respirator Set is designed to help protect workers and hobbyists from many common organic vapours and airborne particles encountered in coatings, finishing and maintenance work. Supplied with cotton filters and matching safety goggles, it offers combined protection for the nose, mouth and eyes in a wide range of professional and DIY environments.

Constructed from soft rubber, the half facepiece is shaped to sit securely over the nose and mouth while maintaining a comfortable seal during extended wear. Adjustable head straps allow you to customise the fit and help keep the mask stable when moving or bending. The included filter cartridges are designed for use against certain organic gases and vapours such as those from paints, solvents, benzene, ketones and carbon disulfide, when used in accordance with applicable guidelines. Cotton filter elements add particle filtration and are chosen for their breathability and skin-friendly feel.

The clear goggles included in the set are intended to reduce exposure of the eyes to dust, fine spray, splashes and flying debris produced during painting, spray polishing, sanding and similar work. Lightweight construction and a compact profile make the respirator easy to store in a toolbox or work locker between jobs. When resistance to breathing increases or odours become noticeable, the filter box or cotton filter should be replaced following the instructions provided.

This equipment is intended for occupational and workshop use where the type and concentration of hazardous substances are known and controlled. It must not be used in oxygen-deficient atmospheres (below 18%) or in environments that are immediately dangerous to life or health. Users should receive appropriate training from a qualified person before use, and the mask should be fit-checked before each shift to verify a proper seal.

Why It's a Smart Choice

• Reusable half face design helps reduce ongoing consumable costs compared with single-use masks.
• Combined respirator and goggles set offers coordinated protection for breathing and eye areas in one kit.
• Adjustable rubber facepiece and straps support a stable, comfortable fit during painting, spraying and polishing work.

FAQ

Q: What type of work is this respirator suitable for?
A: It is commonly used for painting, spray application, polishing, light chemical handling and general workshop tasks where organic vapours and particles are present at controlled levels and within the capability of the cartridges supplied.

Q: How do I check that the mask is sealed correctly?
A: After fitting and tightening the straps, cover the inlet side of the filter box with your hand and inhale gently for 5-10 seconds. If the facepiece slightly collapses and no air leaks are felt around the edges, the seal is generally acceptable. If you feel leakage, readjust the straps and mask position and repeat the check.

Q: When should I replace the filters?
A: Replace the filter box or cotton filter immediately if you notice increased breathing resistance, detect odours or tastes of the substances being used, or if the filters become visibly dirty or damaged.

Q: Can this respirator be used in low-oxygen or unknown atmospheres?
A: No. Do not use this mask where oxygen concentration is below 18%, where contaminants are unknown, or where concentrations may be immediately hazardous to life or health. In such conditions, specialised respiratory equipment is required.

Q: How should I store the respirator when not in use?
A: Store the mask and goggles in a clean, dry, sealed container or bag, away from dust, chemicals and direct sunlight. Ensure filters are kept free from contamination while in storage.