5.8GHz Wireless XLR Microphone Transmitter & Receiver

Wireless XLR freedom for live sound, video and stage

This 5.8GHz Wireless XLR Cable Receiver and Transmitter Microphone System converts your existing dynamic or moving‑coil microphones into a reliable wireless setup in seconds. Designed around a plug-on XLR mic adapter, it gives you a clean, cable‑free signal path for interviews, live performances, presentations, video production, and home studio work.

The system includes one XLR female transmitter and one XLR male receiver. Plug the transmitter directly into your dynamic microphone or mixer output, then connect the receiver to a mixer, PA system, audio interface, camera, or other XLR input. Operating in the 5.8GHz band, it offers strong resistance to common 2.4GHz and UHF interference, maintaining a stable RF link over typical stage and location distances (environment dependent).

With a 24‑bit/48kHz digital audio path, the system delivers a full 20Hz-20kHz frequency response with a signal‑to‑noise ratio of 105dB and distortion below 0.02%. Latency is kept under 5ms, so timing remains tight for live performance and monitoring. Built‑in rechargeable batteries provide approximately 3.5-5 hours of use per charge, and the included cable allows you to charge both the transmitter and receiver at the same time.

The system supports one‑to‑one and one‑to‑many configurations, and up to four sets can operate simultaneously on different channels in the same space. Simple plug‑and‑play operation, compact housings, and robust XLR connections make it suitable for stages, rehearsal rooms, houses of worship, conference venues, content studios, and mobile video rigs.

Why It's a Smart Choice

• Convert wired dynamic microphones into wireless in seconds using the plug‑on XLR transmitter and receiver.
• 5.8GHz digital transmission with <5ms latency, 24‑bit/48kHz audio, and 20Hz-20kHz response for clear, consistent sound.
• Built‑in rechargeable batteries, simultaneous charging, and multi‑channel support for flexible use in live, studio, and on‑location setups.

FAQ

Q: Which microphones are compatible with this system?
A: It is designed for dynamic and other moving‑coil microphones with XLR connectors. It is not intended for condenser microphones that require phantom power from the transmitter.

Q: Can I use multiple systems at the same time?
A: Yes. Up to four transmitter/receiver sets can operate simultaneously on separate channels in the same location, provided they are correctly paired.

Q: What is the typical operating range?
A: In open spaces with minimal obstacles, the system can reach up to around 100 feet. Walls, metal structures, and strong RF sources can reduce effective range.

Q: Does it work with mixers, PA systems, or cameras?
A: Yes. The XLR male receiver can plug into mixers, PA inputs, audio interfaces, and XLR-equipped cameras or recorders, as long as they accept a standard XLR mic or line input.

Q: How do I pair the transmitter and receiver?
A: Power on both units, connect them to your mic and destination device, then long‑press the channel button to enter pairing mode. When the indicators flash and then turn solid blue, the link is established.