1200W RGB LED Fog Machine with Remote Control

Transform Events with Professional Fog and RGB Lighting

This 1200W RGB LED fog machine is designed for reliable, professional-grade atmospheric effects at events of all sizes. Combining dense fog output with controllable multi-color LED lighting, it helps you define the mood on dance floors, stages, and event spaces with consistent performance. Ideal for DJs, discos, weddings, home parties, and small venues, it delivers both smoke and light effects from a single, easy-to-operate unit.

The machine uses standard fog fluid (not included) and features a clear, step-by-step operating sequence. Fill the tank, ensure the metal intake nozzle is fully submerged, connect power, and allow 4-5 minutes of warm-up time. Once heated, a single button press on the remote triggers a fog burst. The unit is designed to automatically cycle: it sprays fog for approximately 60 seconds, reheats for about 45 seconds, then is ready to spray again. RGB LEDs offer six controllable color modes, and the smoke and lighting can be controlled independently so you can run fog alone, light alone, or both together. You can manually select red, green, blue, or combined colors using the dedicated R/G/B controls.

For flexible installation, the fog machine can be placed on the floor or mounted at height using the included handle and screws. It must remain parallel to the ground and positioned in a well-ventilated area with at least 30 cm of clearance around the housing for heat dissipation. During warm-up, a small amount of smoke and a slight heating smell may be noticeable; this is a normal part of the operation. The unit is designed for indoor and covered outdoor use where it can be kept dry and ventilated.

The fog produced is intended for visual effect and disperses without leaving noticeable residue under normal use. Built-in safety guidance includes keeping the machine out of reach of children, away from flammable and explosive materials, and maintaining at least 40 cm distance from the nozzle to avoid burns. If you notice reduced smoke output, unusually loud pump noise, or no fog at all, switch off the power and check fog fluid level, fuse, cables, and plug before further use.

The package includes the fog machine, power cord, wireless remote control, mounting/transport handle, handle screws, and a user manual to help you set up quickly and operate with confidence.

Why It's a Smart Choice

• Combines dense fog and RGB color effects in one unit, reducing the need for separate lighting and haze equipment.
• Remote control and automatic spray/heat cycle support hands-off operation during performances and events.
• Adjustable RGB colors and independent fog/light control allow you to tailor the atmosphere for parties, weddings, stage shows, and seasonal events.

FAQ

Q: Is fog fluid included with the machine?
A: No. Fog fluid (smoke liquid) is not included. Use standard water-based fog fluid and ensure the metal intake nozzle is completely submerged before operation.

Q: How long does the machine take to warm up?
A: Initial warm-up typically takes about 4-5 minutes after switching on. After each fog burst, the unit reheats for roughly 45 seconds before it can spray again.

Q: Can I use the lights without fog?
A: Yes. The smoke and RGB lamp beads can be controlled separately, allowing you to use lighting effects alone or fog alone, depending on your needs.

Q: Where can this fog machine be used?
A: It is suitable for DJ setups, ballrooms, discos, home parties, theaters, churches, weddings, Christmas and holiday events, and other indoor or covered event spaces with adequate ventilation.

Q: What safety precautions should I follow?
A: Place the machine in a ventilated area, keep it parallel to the ground, leave at least 30 cm clearance around it, and keep people at least 40 cm away from the nozzle. Do not use near flammable materials, and keep it out of reach of children.