1000W Flameless Magnetic Induction Heater Kit

Fast, Controlled Heat for Professional Automotive Repair

This 1000W Magnetic Induction Heater Kit delivers fast, concentrated heat for loosening rusted or seized metal components without using an open flame. Designed for automotive workshops and serious DIY users, it is available in 110V or 220V versions and in 8‑coil or 10‑coil configurations to match different regional power supplies and repair needs.

The heater uses high‑frequency magnetic induction to generate heat directly within the metal part. This allows you to quickly expand bolts, nuts, gears, bearings, pulleys and other ferrous components, helping to free them without excessive mechanical force or aggressive chemicals. Typical heating times to approximately 800°C are around 5-40 seconds, depending on part size, material and coil selection. The unit operates in ambient temperatures from approximately -40°C to 60°C, at relative humidity below 95% RH and atmospheric pressure of about 86-100 kPa. An internal protection temperature of about 80°C helps safeguard the instrument during extended use.

The compact main unit is designed for handheld operation and comes housed in a portable case for easy storage and transport. The kit includes multiple interchangeable coils: 30 mm, 40 mm and 50 mm diameter coils for different bolt and nut sizes, plus flat heating coils for sheet metal or surface‑area heating. The 10‑coil version adds bending coils for improved access in confined or awkward spaces. No external water cooling is required, and the tool is suitable for use around many plastics and other flammable materials where an open flame would be unsuitable.

Why It's a Smart Choice

• Flameless induction heating reduces fire risk and allows work near plastics, wiring and hoses.
• Multiple coil sizes and shapes improve access to tight areas and different component geometries.
• Fast, localized heating helps loosen corroded parts efficiently and can reduce labor time on stubborn fasteners.

FAQ

Q: What is the difference between the 8‑coil and 10‑coil versions?
A: Both versions include the main induction heater, round coils in 30 mm, 40 mm and 50 mm, flat coils, a manual and a portable case. The 10‑coil version adds two bending coils, which are useful for reaching fasteners in confined or obstructed areas.

Q: How do I choose between 110V and 220V?
A: Select the voltage that matches your local mains supply and plug type. The 110V version is commonly used in regions such as North America, while the 220V version is suited to many European and other international markets. Always confirm compatibility with your local electrical standards.

Q: What kind of jobs is this heater suitable for?
A: It is mainly used for automotive repair tasks such as heating rusted bolts, nuts, bearings, gears and pulleys. It can also be applied to small machinery parts and other ferrous metal components where localized, controlled heat is required.

Q: Does it require special cooling or additional equipment?
A: The unit does not require external water cooling. Use it in a well‑ventilated area, follow the operating instructions, and allow the tool to cool if it reaches its internal protection temperature.

Q: Can it be used near plastic parts and wiring?
A: The flameless design allows work in areas where open flames would be unsuitable. However, always monitor nearby materials and avoid prolonged heating of areas where heat‑sensitive components are present.